The Flux Kit is the result of a collaboration between Wotofo and Rig Mod. The Flux kit is made up of the Flux mod and the Flow Pro sub ohm tank. This is a 200W mod, and it can hold up to 5ml of e-juice. What’s more, it comes with mesh coils. This is a powerful vape kit. Although it comes with a lot of exciting features, it is easy to use. The Flux kit is one of the best vape mod kits on the market today.
The Flux mod is a beauty. From the moment you set your eyes on this device, you can tell that it is something special. The mod is made of zinc alloy and doesn’t feel very heavy. It measures 91.6mm by 50.88 by 30.3mm. The Flux mod runs on dual 18650 batteries. You will find the battery door under the device, along with ventilation holes. The device runs on dual 18650 batteries. It has a wattage range of 1W to 200W.
The Flux mod comes with hidden buttons. There is a large firing bar on the side, which is very responsive. On the back of the device, you will find the Rig Mod logo. On the front, there is a 1.3-inch OLED screen with two control buttons under it. Further below, there is an LED light as well as a micro USB port. On top of the mod, there is a spring-loaded 510 pin for attaching your mod.
The Flux mod is very easy to use. You simply need to press the firing button five times to switch it on. There are not a lot of things to figure out as far as the features of the device go. The screen shows the wattage, voltage, and resistance of your coil. You have three main modes to choose from for this device; Standard, Powerful, and Powerful+. You can also customize the LED light below the screen.
The Flux mod comes with numerous safety features, including low battery warning, 10-second auto cutoff, overheating protection, short-circuit protection, and so much more.
Flow Pro Sub Ohm Tank
The Flow Pro is a basic sub ohm tank. It has a diameter of 25mm and is made of stainless steel. The tank comes with a straight glass tube and a bubble glass tube. It can hold 4ml of e-juice if you use the straight glass tube, and 5ml of e-juice if you use the bubble glass tube. The Flow Pro has a top-filling design. You simply have to press the top cap to the side to reveal the top-filling hole.
At the base of the Flow Pro, there are three airflow holes. You can adjust the airflow by turning the control ring. Under the tank is a silver-plated 510 pin for connecting it to a mod. The Flow Pro comes with two 0.18 ohm multihole coils which have a mesh-like design. The coils are rated for vaping at around 40W to 80W.
You can get the Wotofo & Rid Mod Flux Kit at the Wotofo online store for only $39.99 – this is $55 off the original price of this product. Wotofo has many vaping devices and accessories on sale, as well as paraphernalia like vape caps.